An empty room with a dark ceiling fan and light mounted on the ceiling
Installs

Ceiling fan and light fixture installation in Logan

Fans, lights and chandeliers around Logan and Cache Valley, swapped onto the wiring you already have. Mounted to a box that will actually hold it, balanced so it does not wobble, and the old one taken away.

★★★★★ 5.0 from 13 Google reviews Licensed & insured, B100 General Contractor #142481980 Owner does the work
First question

Do you actually need an electrician?

Most people assume yes and pay accordingly. For a straight swap, usually not. Here is the honest split, and it is the same answer anywhere in Cache Valley.

A swap, which is me

There is already a fixture there and the wiring stays where it is.

  • Replacing a light with another light
  • Replacing a fan with another fan
  • Putting a fan up where the box is already rated for one
  • Hanging a chandelier or pendant in place of an existing fixture
  • Swapping a flush mount for a downrod, or the other way round
  • Taking down a fixture and capping the box off tidily

New work, which is an electrician

Anything that changes where power goes.

  • No box in the ceiling at all, so a circuit has to be run
  • A new switch, or moving the switch that controls it
  • Moving the fixture to a different spot on the ceiling
  • Adding a dimmer where the wiring will not support one
  • Anything inside a wall, or at the panel
  • Wiring in the box that is damaged, scorched or ungrounded

Send me a photo of the fixture and one of the switch and I can usually tell you which column you are in before anybody drives anywhere.

A round flush mount ceiling light fitted against a plain ceiling
Behind the fixture

The part nobody looks at

Every fixture screws into a box set into the ceiling, and that box is rated for a certain weight. A box made for a light holds a few pounds that never move. A fan is heavier and it spins, so it puts a constant twisting load on the box and on the screws holding it.

A fan-rated box is braced across the framing and stamped to say so. Hanging a fan from a plain light box is the most common mistake with these jobs, and it is why you occasionally hear about one coming down months later.

  • Is the existing box fan rated, and fixed to framing rather than just to drywall
  • Are the screws the right ones, because fan brackets need machine screws into metal, not drywall screws
  • Is there a ground wire, which older Logan houses sometimes do not have
  • Is the fan you bought heavier than what is up there now
  • Do the drop and the blade span suit the room and the ceiling height
Wobble

A wobbling fan is almost never a bad fan

It is the most common complaint about ceiling fans and the most commonly misdiagnosed. Half the wobbling fans I get called out to in Logan are perfectly good fans that were mounted in a hurry. The order you check things in matters.

  • Blade trackingEach blade should sit at the same height as it turns. One sitting even an eighth of an inch low is enough to set up a wobble, and it is usually a bent bracket rather than a bad blade. This is the first thing I check and most of the time it is the answer.
  • The mounting bracketThe bracket has to be pulled up tight to the box, square, and on the right screws. A bracket that has worked loose over a few years will wobble no matter how well the blades are balanced.
  • The box itselfIf the box moves, the fan moves. A box fixed only to drywall, or one that has loosened in the framing, has to be sorted out before anything else is worth doing.
  • Balance lastOnly once the first three are right does a balancing kit make sense. Used first, it just hides the real problem for a while.
A five blade ceiling fan with a light kit, seen from below

Your fan has a winter setting, and it is worth using

There is a small switch on the motor housing that reverses the direction. Through the summer the fan turns counterclockwise and pushes air straight down at you. Flipped for winter, it turns clockwise and slowly, pulling air up the middle of the room and pushing the warm air that has collected at the ceiling back down the walls.

In a valley where January sits around sixteen degrees and the furnace runs for months, that matters more here than it does in most places. It matters most in exactly the rooms people have fans in around here, the ones with vaulted or high ceilings where all the heat you are paying for ends up out of reach.

While I am up there

If I am installing or servicing a fan between October and March I will set the direction for the season and show you where the switch is, so you can flip it back yourself in spring.

It is a small thing and it costs you nothing, but a surprising number of fans in Cache Valley have been running the wrong way round since the day they went up.

Around the valley

What I find depends on the house

Older Logan

Center Street, the Island, the streets around Utah State. Boxes that predate anybody thinking about ceiling fans, fixtures that have been painted over more than once, and sometimes no ground wire in the box at all. The fixture swap itself is quick. Getting the old one off and finding out what is behind it is the part that takes the time, and it is why I would rather look before quoting.

The newer builds

Nibley, Hyde Park, North Logan, Providence, Smithfield. Good news here: builders usually rough in a fan-rated box in the main bedroom and living room even when they only fit a light, so adding a fan later is often just a swap. The other common one is a vaulted great room where the builder fitted a flush mount, which needs a sloped adapter and a downrod to work properly.

Pricing

How I price a fixture or fan

A flat number before I start, the same from Logan out to the edges of the valley. You buy the fixture, or tell me what you want and I will.

What moves the number

  • Whether it is a straight swap or the box has to be changed
  • Ceiling height, because a stairwell or a vaulted great room needs more setup than a bedroom
  • Fan versus light, since a fan takes longer to mount and balance
  • How many you are having done in the one visit
  • What turns up behind the old fixture, which in an older house is not always predictable

How it works

  • Photo of the fixture and the switch is usually enough for a straight answer
  • Free estimate, one flat number agreed before anything starts
  • If it turns out to be electrician work, you hear that before I start, not after
  • Several fans or lights in one trip costs less than having me out repeatedly
Reviews

What people say

Real Google reviews from homeowners around Cache Valley.

5.0 ★★★★★13 Google reviews See more reviews
★★★★★

Brenden is awesome to work with! I had him install a couple of ceiling fans and he did an incredible job. I really appreciate his attention to detail. For example one of the blades wobbled a little and he wasn't ok with that, so he took a few extra minutes to look it over, figure out what happened, and made sure it was fixed before he left.

A Adam DavisGoogle review
★★★★★

Amazing service! Fast, friendly and very informative. Saved me thousands of dollars of being wasted by a different vendor who quoted me incorrectly. I now have a go to guy for home services.

B B. Luxx BrandGoogle review
★★★★★

10/10 Highly recommend. If you are looking for Great customer service, HONEST, Communication through out your service this is the company to reach out too. Highly pleased with the work.

B Brandi BellGoogle review
Questions

Ceiling fan and light fixture FAQs

Do I need an electrician to put up a ceiling fan?+

Not if there is already a fixture there and the box behind it is rated to hold a fan. That is a swap, and it is work a handyman can do in Utah. You need an electrician when there is no box in the ceiling at all, when a new switch or circuit has to be run, or when the wiring in the box is damaged. I can tell you which of those you have, usually from a photo.

What is a fan-rated box and why does it matter?+

The metal or plastic box your fixture screws into is sized for the weight it carries. A box made for a light holds a few pounds of static weight. A fan is heavier and it moves, which puts a constant twisting load on the box and the screws. A fan-rated box is braced to the framing and marked for fan support. Hanging a fan off a light box is the single most common mistake with these, and it is the reason you occasionally hear about one coming down.

My ceiling fan wobbles. Can that be fixed?+

Nearly always, and it usually is not the fan. A wobble comes from blades that are not tracking at the same height, a loose mounting bracket, or a box that is not held properly. I check blade tracking first, then the bracket, then the box. A fan that has been balanced and mounted right does not wobble, and I will not leave one that does.

Can you put a fan where there is only a light?+

If the box up there is fan rated, yes. If it is a standard light box, it has to be swapped for a fan-rated one first. Whether that is a quick job or an electrician's job depends on whether I can get at it from above, and on what the wiring looks like once the old fixture is down. I will tell you which it is before anything comes apart.

Do you install chandeliers?+

Yes, including over a stairwell or an entryway where the ceiling is high. Weight is the thing to check first. Most boxes are rated to around fifty pounds, and a lot of chandeliers are heavier than people expect once they are out of the carton. If yours is over that, it needs proper support added, and I will say so rather than hang it and hope.

What about ceilings that are vaulted or really high?+

Common in the newer builds around the valley. A vaulted ceiling needs a sloped ceiling adapter, and a high flat ceiling usually wants a downrod so the fan sits at a height where it actually moves air. Getting the drop right matters more than people think. Too high and the fan does very little.

Can you take down the old one as well?+

Yes, that is part of it. Power off at the breaker, old fixture down, box checked, new one up, tested, and the old one taken away if you want it gone. You do not need to have anything prepared before I get there.

I bought the fan already. Will you fit it?+

That is most of these jobs. Bring whatever you have picked and I will fit it. If you have not bought yet and you are not sure what suits the room, tell me the ceiling height and roughly the room size and I will point you at the right size and mount type before you spend anything.

What will you not take on?+

New circuits, new switch locations, moving a box to a different spot, anything inside a wall, panel work, and anything that needs a permit. Utah lets a handyman do minor work and that is where the line sits. If your job is on the other side of it I will tell you on the phone rather than driving out to tell you in person.

Are you licensed and insured?+

Yes. Utah B100 General Contractor license, number 142481980, and I carry insurance.

Free estimates

Got a fan or a light waiting in its box?

Call or text and you get me, Brendan. Send a photo of what is up there now and I can usually tell you what it needs before I come out.

☎Call or text(435) 361-8520
⏰HoursMon-Sun, 7am to 5pm